Rinnai tankless water heater code 58: Secondary heat exchanger overheat
Tankless water heater, United States
An overheat switch on the secondary heat exchanger opened, which points to scale build-up inside it.
This needs a licensed gas or HVAC technician. There is nothing safe to check yourself. Leave the covers on and book a professional.
Only some models show this code. Check the list below.
What causes it
-
Scale build-up in the secondary heat exchanger. It needs flushing, and hard water should be treated.
-
Loose or damaged sensor wiring.
How to read this code on your unit
Booking a licensed gas or HVAC technician
Have the heat exchanger flushed and descaledplumber
- Scale from hard water builds up inside the heat exchanger and restricts flow and heat transfer.
- Book a licensed plumber or the manufacturer's service agent to flush and descale the heat exchanger using the manufacturer's flushing procedure.
- Ask about water treatment if you have hard water, so the scale does not come back.
Book a licensed gas or HVAC technicianlicensed gas or HVAC technician
- Turn the unit off and leave the covers on. Gas components must only be serviced by a licensed technician.
- Note the code, how often it appears, and the model and serial numbers from the rating label.
- Book a licensed gas or HVAC technician and give them those details.
Models that show this code
32 models in 7 ranges
| Range | Models |
|---|---|
| Commercial (KB) | C199i (REU-KBD3237FFUDC-US), C199e (REU-KB3237WDC-US) |
| KB | RU80i (REU-KB2530FFUD-US), RU80e (REU-KB2530WD-US), RU90e (REU-KBD2934WD-US), RU98i (REU-KB3237FFUD-US), RU98e (REU-KB3237WD-US) |
| KBD | RUC80i (REU-KBD2530FFUD-US), RUC90i (REU-KBD2934FFUD-US), RUC98i (REU-KBD3237FFUD-US) |
| KBP | RUR98i (REU-KBP3237FFUD-US), RUR98e (REU-KBP3237WD-US) |
| KCM | RUCS65i (REU-KCM2025FFU-US), RUCS75i (REU-KCM2528FFU-US), RUS65e (REU-KCM2025W-US), RUS75e (REU-KCM2528W-US) |
| Luxury (VC) | RL75i (REU-VC2528FFUD-US), RL75i(A) (REU-VC2528FFUD-US(A)), RL75e (REU-VC2528WD-US), RL75e(A) (REU-VC2528WD-US(A)), RL94i (REU-VC2837FFUD-US), RLX94i (REU-VC2737FFUD-US), RL94e (REU-VC2837WD-US) |
| Value (VC) | V53e (REU-VAM1620W-US), V53De (REU-AM1620WD-US), V65i (REU-VC2025FFU-US), V65e (REU-VC2025W-US), V75i (REU-VC2528FFU-US), V75e (REU-VC2528W-US), V94i (REU-VC2837FFU-US), V94Xi (REU-VC2737FFU-US), V94e (REU-VC2837W-US) |
Where this comes from
- Troubleshooting tankless water heater diagnostic codes (100000652), non-SENSEI and SENSEI series , page 44
Checked against the manufacturer's manual on 9 October 2026.
Other Rinnai tankless water heater codes
| Code | Meaning | What you can do |
|---|---|---|
| 41 | Frost protection (ambient) sensor fault | Call a pro |
| 51 | Inlet water thermistor fault | Call a pro |
| 52 | Gas modulating valve fault | Call a pro |
| 54 | High exhaust gas temperature | Safe checks first, then a pro |
| 55 | Service reminder | Safe checks first, then a pro |
| 57 | Burner overheat switch open | Call a pro |
| 61 | Combustion fan failure | Call a pro |
| 63 | Recirculation low flow | Call a pro |
| 65 | Water flow control failure | Safe checks first, then a pro |
| 66 | Bypass flow control fault | Call a pro |
| 70 | Control board (PCB) failure | Safe checks first, then a pro |
| LC | Scale build-up in the heat exchanger | Safe checks first, then a pro |